- 190 -
It is possible to distribute the streaming image of this unit (IP image transfer) or change the setup of this unit (IP
control) with the web screen of the mobile terminal by connecting this unit and a mobile terminal to a network via a
wireless access point that is connected to this unit.
Connect to this unit from the mobile terminal and display the image of this unit (JPEG format only). The image will be
automatically updated to the most current state. Operations such as zoom, focus, or white balance can also be
performed from the mobile terminal.
Refer to page
≥
Images are displayed only in the JPEG format when using the mobile terminal.
≥
When the authentication dialog box is displayed, input the user name and password. The default settings for the
user name and password are as follows.
≥
If the mobile terminal does not support the character code UTF-8, the characters cannot be displayed properly.
1
Input “http://IP address/mobile/ ” using the mobile terminal, and press the enter button.
≥
The unit’s images will now be displayed.
Iris
When this button is pressed, the buttons for performing
the iris operations are displayed on the screen.
Zoom
The unit’s zooming operations are performed using these
buttons.
Network connection
Remote operation by a mobile terminal
User name
admin
Password
12345
This switches the iris between auto and
manual.
At the auto setting, the button label is green.
This adjusts the iris in the “close” direction.
It does not work during automatic
adjustments.
This adjusts the iris in the “open” direction.
It does not work during automatic
adjustments.
Use this to adjust the zoom (magnification) to
1.0
k
.
Use this to adjust the zoom (magnification) in
the Wide direction.
Use this to adjust the zoom (magnification) in
the Tele direction.
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 190 ページ ２０１７年５月２２日 月曜日 午後２時１１分
