- 185 -
∫
Status confirmation tab [Status]
Confirm the status of the unit.
¥
UPnP
Port number(HTTP)
Displays the port number configured via UPnP port
forwarding.
Status
Displays the port forwarding status.
Port number(HTTPS)
Displays the port number configured via UPnP port forwarding.
Status
Displays the port forwarding status.
Router global address
Displays the global address of the router.
∫
Reset settings tab [Default reset]
The unit’s setting data is initialized and the unit is restarted
on this screen.
Reset to the default (Except the network
settings)
The setup content of this unit is reset to the initial setup,
and this unit is rebooted by clicking on the [Execute] button. However, the following setup contents are not initialized.
When the initialization operation is started, no operations can be undertaken for about 1 minute.
Reboot
When the [Execute] button is clicked, the unit is rebooted.
After the unit has been rebooted, no operations can be undertaken for about 1 minute as is the case when the unit’s
power is turned on.
≥
All the settings under [Setup] → [Basic] → [Date&Time]
≥
All the settings under [Setup] → [Multi-screen]
≥
All the settings under [Setup] → [User mng.]
≥
All the settings under [Setup] → [Network]
≥
All the settings under [Setup] → [Maintenance]
≥
Setup of [SYSTEM FREQ] and [LANGUAGE]
≥
Setup of [SCENE FILE] (only during SDI Mode)
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 185 ページ ２０１７年５月２２日 月曜日 午後２時１１分
