– 127 –
Chapter 7 Menu Operations — Menu list
[AUDIO SETUP] screen
Item
Description of settings
Remark
FRONT VR CH1
Sets whether to enable or disable front volume for CH1 input.
f
When audio channel 1 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
[FRONT]
Front volume is enabled when CH1 is front microphone input.
[W.L.]
Front volume is enabled when CH1 is wireless input.
[REAR]
Front volume is enabled when CH1 is rear input.
[ALL]
Front volume is enabled when CH1 is either front, wireless, or
rear.
[OFF]
Front volume is disabled for CH1.
FRONT VR CH2
Sets whether to enable or disable front volume for CH2 input.
The setting contents are the same as [FRONT VR CH1].
[OFF]
f
When audio channel 2 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
FRONT VR CH3
Sets whether to enable or disable front volume for CH3 input.
The setting contents are the same as [FRONT VR CH1].
[OFF]
f
When audio channel 3 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
FRONT VR CH4
Sets whether to enable or disable front volume for CH4 input.
The setting contents are the same as [FRONT VR CH1].
[OFF]
f
When audio channel 4 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
MIC LOWCUT CH1*
Sets microphone low cut filter for CH1.
[FRONT]
Works for front microphone input.
[W.L.]
Works for wireless input.
[REAR]
Works for rear microphone input.
[OFF]
Off for any input.
MIC LOWCUT CH2*
Sets microphone low cut filter for CH2.
The setting contents are the same as [MIC LOWCUT CH1].
[OFF]
MIC LOWCUT CH3*
Sets microphone low cut filter for CH3.
The setting contents are the same as [MIC LOWCUT CH1].
[OFF]
MIC LOWCUT CH4*
Sets microphone low cut filter for CH4.
The setting contents are the same as [MIC LOWCUT CH1].
[OFF]
LIMITER CH1
Sets CH1 limiter.
[ON], [OFF]
f
When audio channel 1 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, limiter does not work regardless of the
setting of this item since automatic adjustment
mode is used.
LIMITER CH2
Sets CH2 limiter.
[ON], [OFF]
f
When audio channel 2 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, limiter does not work regardless of the
setting of this item since automatic adjustment
mode is used.
LIMITER CH3
Sets CH3 limiter.
[ON], [OFF]
f
When audio channel 3 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, limiter does not work regardless of the
setting of this item since automatic adjustment
mode is used.
LIMITER CH4
Sets CH4 limiter.
[ON], [OFF]
f
When audio channel 4 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, limiter does not work regardless of the
setting of this item since automatic adjustment
mode is used.
25M REC CH SEL
Selects the audio channel to be recorded in DVCPRO and DV formats.
f
This item is available only when the [SYSTEM
MODE] item is [480-59.94i] or [576-50i], and
codecs are DVCPRO and DV.
f
Regardless of the number of channels of the input
signal to the <SDI OUT/IN (OP)> terminal, the
channel set at this item is recorded even if the
[REC SIGNAL] item is set to [SDI IN].
f
This setting cannot be changed when clip
connection is underway with one-clip recording.
[2CH]
Records only CH1 and CH2.
[4CH]
Records all four channels.
indicates factory setting values.
