13
General
：
Color TV Standard Settings (Settings for frame frequency)
Ge
ner
a
l
The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the
preferred standard, refer to the procedures described below.
1
After connecting the unit to the power supply and then
turning on the power, press the MENU SW button while
pressing the LIGHT SW button to open OPTION
MENU.
2
Turn the JOG dial button to move the cursor (arrow) to
the AREA SELECT item on the AREA SETTING
screen in OPTION MENU, and the press the JOG dial
button.
3
Select the area among NTSC, NTSC(J), and PAL. After
selecting the area by turning the JOG dial button, press
the JOG dial button.
4
Move the cursor (arrow) to
_
AREA SET by turning
the JOG dial button, and then press the JOG dial but-
ton. The following window appears.
5
Move the arrow (
→
) to YES and press the JOG dial but-
ton. The settings selected in Step 3 above are reflected
in FACTORY and CURRENT DATA on the screen.
6
Turn off the power supply once and then turn on it
again.
◆
Notes
z
The settings are not saved unless SET is executed even if
NTSC, NTSC(J), or PAL is selected in the AREA SELECT.
z
When AREA SELECT is revised, the “
_
AREA SET”
blinks.
z
When these items are set when the unit is used for the first
time, only the following 8 items are revised. When the
other settings of the unit are set in MAIN MENU, the
MENU setting values for items other than the following 8
are ones that were set at the factory.
*1 SET UP of the DOWN CON SETTING menu
(Enabled only for 1080-59.94i)
*2 SET UP of the SYSTEM MODE menu
(Enabled only for 480-59.94i)
*3 Select THUMBNAIL
>
SETUP
>
DATA FORMAT from the
thumbnail menu. For details refer to [Setting the Thumbnail
Display Mode] (page 128).
Color TV Standard Settings
(Settings for frame frequency)
*** OPTION MENU ***
OPTION
#
AREA SETTING
< AREA SETTING >
#
AREA SELECT: PAL
_
AREA SET
AREA SET?
YES
#
NO
Factory
settings
NTSC
NTSC(J)
PAL
SYSTEM
MODE
1080-
59.94i
1080-
59.94i
1080-
59.94i
1080-50i
CAMERA
MODE
60i
60i
60i
50i
SET UP*
1
7.5%
7.5%
0%
0%
D/C SET UP*
2
7.5%
7.5%
0%
0%
REAR LINE IN
LVL
+4dB
+4dB
+4dB
0dB
AUDIO OUT
LVL
+4dB
+4dB
+4dB
0dB
HEAD ROOM
20dB
20dB
20dB
18dB
GUI metadata
language
indication
American
English
American
English
Japanese/
For Japan
American
English
LANGUAGE
Not
displayed
Not
displayed
ENDLISH
JAPANESE
Not
displayed
DATA
FORMAT*
3
MDY
MDY
YMD
DMY
AJ-HPX3000G(VQT1D27)E.book 13 ページ ２００７年９月３日 月曜日 午後２時３４分
