Panasonic AG-HPX172EN Operating Instructions Manual Download

Page: 24 / 128

Basic shooting operations

Preparing to shoot

Set the POWER switch to ON. (Page 18)

Lift up the viewfinder, press the side of the

card slot cover (

), and slide the cover (

)

to open it.

Insert the P card securely in the card slot.

Push the P2 card eject button to the

direction of the arrow, and close the card
slot cover.

There are two card slots.
Be absolutely sure to close the card slot
covers to keep the dust out.
Do not remove the P2 card while the P2 card
access lamps are blinking orange. (Page 25)

POWER

OFF

Lock

release

Shooting in auto mode

Turn the POWER switch to ON. (Page 18)

Check that the mode lamp (CAM) is lighted
red.

Switch the AUTO/MANUAL switch to AUTO

to select auto mode.

“

” appears on the viewfinder and LCD

screens.
The focus, gain, iris and white balance are
adjusted automatically.

•
•

•

Press the START/STOP button (Red) on the

POWER switch to start shooting.

Press again to return to the camera to the
shooting standby mode.
Use the handle START/STOP button to make
it easier to shoot from low angles.

POWER

OFF

POWER

OFF

AUTO MANUAL

Mode button

Mode lamp

Lock release

LCD

side

Handle START/STOP

button

REC CHECK

button

Under the following circumstances, even if you
press the STOP button it may take some time

until the writing to the P2 card finishes. For this

reason, the operation will not be acknowledged
if you press the START button too soon.

Stopped after only a short recording time
Stopped immediately after the recording has
moved to a second P2 card

•

•
•

Shooting

Summary of Contents for AG-HPX172EN

































































































































Search results

Summary of Contents for AG-HPX172EN

Reviews:

Related manuals for AG-HPX172EN

Brands by name

Popular brands

Panasonic AG-HPX172EN, Operating Instructions Manual

Search results

Summary of Contents for AG-HPX172EN

Reviews:

Related manuals for AG-HPX172EN

Brands by name

Popular brands