With other products
80
1
Connect this unit and a TV with the HDMI cable (optional).
Use a HDMI cable (optional)
A
with the logo shown above.
2
Set the mode dial to
to turn on the power.
3
Select the input channel on the TV.
Example: Select the [HDMI] channel etc.
(The name of the channel may differ depending on the connected TV.)
4
Start playback on this unit.
The image and audio are output on the TV.
ª
If the image or audio from this unit is not output on the TV
≥
Check that the plugs are inserted as far as they go.
≥
Check the connected terminal.
≥
Check the input setting (input switch) and the audio input setting on the TV. (For more
information, please read the operating instructions for the TV.)
≥
Check [HDMI RESOLUTION]. (
81)
ª
Fitting of the ferrite core
When an HDMI cable is connected to this camera, fit
the supplied ferrite core to the cable as close to the
camera as possible.
≥
Unhook the two tabs on the ferrite core to open it.
Insert the HDMI cable into the ferrite core and close
it.
A
Ferrite core (supplied)
B
Tab
C
HDMI cable (optional)
1
Connecting with a
HDMI
cable (optional)
What is HDMI?
HDMI is the next-generation interface for digital devices. When this unit is connected to a HDMI
compatible device, the image and audio can be output with a digital signal. If you connect this unit
and a HDMI compatible high definition TV and then play back the recorded high definition images
(
14), you can enjoy them in high resolution with high quality sound.
HDMI IN
VQT1R33(E).book 80 ページ ２００８年３月６日 木曜日 午後４時３３分
