Panasonic AG-DVX200ED, Operating Instructions Manual

Page: 29 / 52

29
(ENG) SQT1045
2
Touch the media to record motion pictures
or still pictures.
≥
The media is selected separately for motion pictures or
still pictures and is then highlighted in yellow.
3
Touch [EXIT] to complete the setting.
≥
Before turning on this unit, open the lens cover. ( l 14)
≥ Set [OUTPUT BITS] to [4:2:2(8bit)]. ( l 27)
1
Change the mode to
Recording Mode. (
l 23)
≥
Extract the LCD monitor.
2
Press the recording start/
stop button
B
to start
recording.
A
When you begin recording, REC
(red) is displayed.
≥ Recording will stop when you press
the recording start/stop button again.
≥ Before turning on this unit, open the lens cover. ( l 14)
≥
Set [OUTPUT BITS] to [4:2:2(8bit)]. (
l
27)
≥ Register [CAPTURE] to a USER button. ( l 34)
1
Change the mode to Recording Mode. ( l 23)
≥
Extract the LCD monitor.
2
Press the USER button to which [CAPTURE] is registered or touch the
applicable USER button icon to record a still picture.
≥ For information on the locations of the USER buttons and information on USER button icons,
refer to page 34.
≥ When still pictures are being recorded, the remaining recordable number of still pictures and the
still picture indication
are displayed.
Recording
Recording motion picture with this unit
ON
OFF
REC


Recording
Recording still pictures