- 55 -
To set the length of time before Focus Transition starts
Select the menu.
Automatic White Balance function may not reproduce natural colors depending on the scenes or
lighting conditions. If so, you can adjust the White Balance manually.
≥
Switch to Manual Mode. (
1
Set the WHITE BAL switch to PRST.
≥
The White Balance mode set in [
WB PRESET] will be displayed.
≥
If it will switch to A or B, the White Balance mode is set to [Ach] or [Bch].
2
Press the AWB button to switch the White Balance mode.
≥
The mode will be switched each time the AWB button is pressed:
[P3200K]
#
[P5600K]
#
[VAR
]
≥
If you set the White Balance mode to [
ATW] in either of the following ways, even if you press the
AWB button, the White Balance mode cannot be switched:
j
Pressing the USER button to which [ATW] is registered (
j
Setting the WHITE BAL switch to the position corresponding to your [ATW SET] setting
(
)
: [RECORD SETUP]
#
[FOCUS TRANSITION WAIT]
#
desired time
[0 SEC.]/[5 SEC.]/[10 SEC.]
White Balance
MENU
ャ
モ
ヱンヴヵ
ヸラリヵユチャモロ
ヴユロバヱヶヴラチヴユヵ
P3200K
A
[WB]
B
White Balance
1
AWB button
2
Jog dial
3
WHITE BAL switch
