Panasonic AG-DVX100B Operating Instructions Manual Download

Page: 49 / 88

With the AUDIO MON/VAR button, adjust the
volume of the sound that is output from the
internal speaker and PHONES jack.

On the remote control, press the ZOOM/VOL
button.
• This button works differently during variable

speed search and pause.

(Pages 48 and 51)

Connect the camera to a television with an AV
cable or S-video cord (not included) to view the
images on the television.

Connect the camera-recorder to the TV set
(Page 55).

Start playback.
• To show the information that appears on the

viewfinder and LCD, press the OSD button on
the remote control.

Press the OSD button again to clear the
display.

Press the DATE/TIME button on the remote control
to show the date and time of shooting on the
screen. The display changes as follows each time
you press the button.

Adjusting the volume

Viewing images on a television

AUDIO MON/VAR button

OSD

COUNTER RESET

TITLE

MULTI/

ZOOM

DATE/

TIME

PHOTO

SHOT

START/

STOP

Checking the date and time

OSD

COUNTER RESET

TITLE

MULTI/

ZOOM

DATE/

TIME

PHOTO

SHOT

START/

STOP

Time

Date

Time and Date

Original screen

bac

Summary of Contents for AG-DVX100B

























































































Search results

Summary of Contents for AG-DVX100B

Reviews:

Related manuals for AG-DVX100B

Brands by name

Popular brands

Panasonic AG-DVX100B, Operating Instructions Manual

Search results

Summary of Contents for AG-DVX100B

Reviews:

Related manuals for AG-DVX100B

Brands by name

Popular brands