Panasonic AG-DVX100B, Operating Instructions Manual

Page: 45 / 88

45
Using scene files
The settings according to the variety of shooting
circumstances are stored in each position of scene
file dial.
When shooting, you can retrieve the necessary file
instantly using scene file dial.
• Progressive mode will not be changed even if you
change the scene file while recording. If you want
to change the progressive mode, please set the
camera-recorder to recording standby state.
When the camera-recorder is shipped from the
factory, the following files are stored.
The setting value of the scene file can be changed.
Also you can save the changed scene file to each
position of the scene file dial.
Example: Change the name of the scene file.
1
Set the POWER switch to ON.
2
Turn the scene file dial, then select the scene
file to be changed.
3
In the setup menus, select the SCENE FILE
screen.
• For menu operation (Page 66)
• You can also use the menu buttons on the
remote control. (Page 19)
4
Move the OPERATION lever
r
to select NAME
EDIT.
5
Press the OPERATION lever (
h
) (or move it
y
) then move it
r
to select YES.
F1: SCENE
File suitable for normal shooting.
F2: SCENE FLOU.
File suitable for shooting under fluorescent
lights, ie. indoors.
F3: SCENE SPARK
File suitable for making subjects sharper,
such as at weddings.
F4: SCENE B-STR
File for broadening the contrast of dark parts,
such as when shooting sunsets.
F5: SCENE 24P
File suitable for shooting in progressive 24P
mode.
F6: SCENE ADVANC
File suitable for shooting in progressive 24P
advanced mode.
Scene file dial
Changing scene file settings
SCENE F1: /
PUSH MENU TO RETURN
MATRIX
Shoo
ti
ng