Panasonic AG-DVX100B, Operating Instructions Manual

Page: 20 / 88

20
The remote control
1
Push the catch in the direction shown by arrow
(1) to remove the holder.
2
Insert the battery with the “+” marked side
facing up.
3
Return the holder to its original position.
• When the battery (CR2025) has run out, replace it
with a new one. (The battery lasts about one year,
depending on the frequency of use.)
If the remote control unit fails to work even when it is
operated near the camera-recorder’s remote control
sensor, the battery has run out.
• Keep the battery out of the reach of children.
When using two camera-recorders simultaneously,
set this camera-recorder and the remote control to
either [VCR1] or [VCR2] so the remote control does
not operate the wrong camera-recorder by mistake.
Setting
• Wireless remote control
Press the STOP (
g
) and STILL ADV ( ) buttons
at the same time to set the remote control unit for
use with VCR1.
Alternatively, press the STOP (
g
) and STILL ADV
( ) buttons at the same time to set the remote
control unit for use with VCR2.
When the battery in the remote control unit is
replaced, the remote control unit is set for use
with VCR1.
• Camera
In the setup menus, OTHER FUNCTIONS
screen, REMOTE, set to VCR1 or VCR2.
(Page 77)
If different settings are used for the camera-
recorder and remote control unit, “REMOTE” lights
in red on the viewfinder and LCD monitor.
Insert the battery Remote control setup
OSD
COUNTER RESET TITLE
STILL ADV PAUSE STILL ADV
INDEX
SELECT
STORE
OFF/ON
P.B.DIGITAL
VAR.
SEARCH
VOL
+
-
PB.
ZOOM
MENU
SET
ITEM
STOP INDEX
MULTI/
P-IN-P REC A.DUB
PLAY /REW FF/
ZOOM
DATE/
TIME
PHOTO
SHOT
START/
STOP
VCR2
VCR1