manualshive.com logo in svg

Panasonic AG-CX6, Operating Instructions Manual

Share
Download
Panasonic AG-CX6 Operating Instructions Manual Download Page 217

Firmware Ver. 1.4 

—

 Configuration Menu Added for Focus Ring Operations

- F 8 -

Configuration Menu Added for Focus Ring Operations

[FOCUS RING DRIVE]

[CAMERA] menu 

 [SW MODE] 

 [FOCUS RING DRIVE]

Switches the way focus is adjusted with the focus ring.

≥

Also set [FOCUS RING SETTING].

(Factory setting: [NON-LINEAR])

[FOCUS RING SETTING]

[CAMERA] menu 

 [SW MODE] 

 [FOCUS RING SETTING]

¥

When [FOCUS RING DRIVE] is set to [NON-LINEAR]

Sets the way focus is adjusted with the focus ring.

(Factory setting: [SPEED])

¥

When [FOCUS RING DRIVE] is set to [LINEAR]

Sets the rotational angle of the focus ring.
The items that can be set are as follows.

≥

[90°], [120°], [150°], [180°], [210°], [240°], [270°], [300°], [330°], [360°]

(Factory setting: [180°])

[NON-LINEAR]

The focus value changes according to the rotational speed and rotational position of the focus ring.

[LINEAR]

The focus value changes according to the rotational angle of the focus ring.

[SPEED]

Adjusts the focus value according to the speed at which the focus ring is rotated.

[COARSE]

Adjusts the focus value according to the rotational position of the focus ring.
Since the operation of the focus ring results in a greater change in focus value, this setting is suitable for making rough 
adjustments.

[FINE]

Adjusts the focus value according to the rotational position of the focus ring.
Since the operation of the focus ring results in a smaller change in focus value, this setting is suitable for making fine adjustments.

Summary of Contents for AG-CX6






























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands