Panasonic AG-CX6 Operating Instructions Manual Download Page 144

Page: 144 / 221

Chapter 5 Shooting

—

Multi manual function

- 144 -

Displaying the operation icon screen

Turn the multidial to display the [

ICONS].

Press the multidial.

The operation icon screen is displayed.

Adjusting headphone volume

Adjust the headphone volume during recording.

Connect the headphones to the headphone terminal.

Turn the multidial to display [

AUDIO MON].

Press the multidial.

Turn the multidial to adjust the volume.

There is no change to the sound that is actually recorded.

Press the multidial.

The setting changes to the value displayed and exits.
Press the <EXIT> button to exit without changing the setting.

NOTE

If no operations are performed in Step 4, the setting is ended.

Summary of Contents for AG-CX6






























































































































































































































Search results

Summary of Contents for AG-CX6

Reviews:

Brands by name

Popular brands

Panasonic AG-CX6, Operating Instructions Manual

Search results

Summary of Contents for AG-CX6

Reviews:

Brands by name

Popular brands