Panasonic AG-CX350, Operating Instructions Manual

Page: 204 / 216

– 204 –
Chapter 10 Notes — Recording function that cannot be used simultaneously
Recording function that cannot be used simultaneously
Depending on the recording function that is set, there are recording functions that cannot be used simultaneously.
f Meaning of the symbols used in the table are as follows.
-
l : Can be used simultaneously.
-
—: Cannot be used simultaneously.
Recording function that is set
Recording function
to additionally set
Pre-recording*
1
*
2
Relay recording Simultaneous
recording
Interval
recording*
3
*
4
*
6
*
7
*
8
Background
recording*
1
*
3
*
9
*
10
VFR/Super slow
recording*
3
*
4
*
5
*
10
Pre-recording*
1
*
2
l l
— — —
Relay recording l — — — —
Simultaneous
recording
l
—
l
— —
Interval
recording*
3
*
4
*
6
*
7
*
8
— —
l
— —
Background
recording*
1
*
3
*
9
*
10
— — — — —
VFR/Super slow
recording*
3
*
4
*
5
*
10
— — — — —
*1 Time code is fixed to free run.
*2 The pre-recording is canceled once when three hours has passed without starting the recording.
*3 Cannot set simultaneously in the following cases.
f When recording in AVCHD format
*4 Time code is fixed to recording run.
*5 This cannot be set when the frequency of the [SYSTEM] menu
→ [REC FORMAT] is set to 50.00i/59.94i.
*6 The time code is fixed to [NDF].
*7 The [VIDEO OUT/LCD/VF] menu
→ [SDI OUT] → [SDI REC REMOTE] and the [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [HDMI REC REMOTE] will
not operate.
*8 Cannot set simultaneously when recording format is set to AVC-Intra 200/AVC-Intra 100/AVC-Intra 50.
*9 This will not operate when anything other than 1080p/1080i is selected in the [SYSTEM] menu → [REC FORMAT].
*10 Cannot set simultaneously in the following cases.
f When recording in P2 format