Panasonic AG-CX350, Operating Instructions Manual

Page: 131 / 216

– 131 –
Chapter 5 Shooting — Image quality adjustment
RB gain control function
This function makes settings to add or reduce the intensity of red and blue colors according to the position of the <WHITE BAL> switch.
The function works when the switch is at the <PRST> position or when automatic white balance is active. It does not work when auto tracking white
balance is activated.
r General settings
Use the camera with the factory settings.
r Advanced settings
Set with the [SCENE FILE] menu → [RB GAIN CONTROL SETTING].
f When the <WHITE BAL> switch is at the <PRST> position
[R GAIN AWB PRE]: Sets to add or reduce the intensity of the red color.
[B GAIN AWB PRE]: Sets to add or reduce the intensity of the blue color.
f When the <WHITE BAL> switch is at the <A> position
[R GAIN AWB A]: Sets to add or reduce the intensity of the red color.
[B GAIN AWB A]:
Sets to add or reduce the intensity of the blue color.
f When the <WHITE BAL> switch is at the <B> position
[R GAIN AWB B]: Sets to add or reduce the intensity of the red color.
[B GAIN AWB B]: Sets to add or reduce intensity of the blue color.
f When performing automatic white balance by setting the <WHITE BAL> switch to the <A> position
[AWB A GAIN OFFSET]: Sets whether to keep or reset the values set for [R GAIN AWB A] and [B GAIN AWB A].
f When performing automatic white balance by setting the <WHITE BAL> switch to the <B> position
[AWB B GAIN OFFSET]: Sets whether to keep the values set for [R GAIN AWB B] and [B GAIN AWB B] or reset them.
Chroma setting function
This function sets color saturation and phase. It applies effects on whole images. It cannot be set to individual color hue.
r General settings
[CHROMA LEVEL]: Sets the chroma level of the P
R
signal and P
B
signal. When the vector scope is used, the distance from the center (no color) is
increased or decreased for the entire image.
[CHROMA PHASE]: Finely adjusts the chroma phase of the P
R
signal and P
B
signal. When the vector scope is used, the whole image rotates clockwise
or counter-clockwise.
r Advanced settings
No setting items are provided.
@ @
NOTE
t [CHROMA LEVEL] and [CHROMA PHASE] cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].