74
75
Transferring Files
(continued)
RETURN
MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
Uploading files
Video and audio data recorded on the SDHC Memory
Cards are uploaded to the Back-End server. You can upload
data manually or automatically with Upload Mode on the
Management Mode screen in Administrator setup.
Uploaded data are deleted from the cards.
Notes:
Upload cannot be executed while recording or post-
recording. If upload is selected while recording, a
confirmation dialog box appears. Select [Stop] to stop
recording and start uploading, or [Cancel] to continue
recording. If upload is selected while post-recording, post-
recording stops and upload starts..
For uploading, the network connection must be enabled.
If the Back-End application is not connected, upload is
disabled.
Uploading files manually
Set the Upload Mode on the Management Mode screen in
Administrator setup to MANUAL. (See “Upload Mode” on
1. Press the [MENU] button.
The Menu appears.
2.
Press the [
,
] buttons to select [Export/
Upload] and press the [
] button to confirm the
entry.
Confirm
Select
•
•
•
3. Press the [
,
] buttons to select [Upload]
and press the [
] button to confirm the entry.
Confirm
Select
Files are uploaded.
Note:
When the vehicle’s ignition switch is set to ACC-OFF
with Upload Mode on the Management Mode screen in
Administrator setup set to MANUAL and PowerOff Time
on the Rec/Play screen set to AUTO, uploading will start
automatically.
Cancel uploading
If the [Cancel] button is pressed on the screen, the [REC],
[MENU] or [RETURN] button on the remote control panel, or
the [STOP] button on the Memory Card Video Recorder is
pressed, uploading will be canceled.
Uploading files automatically
When “Upload Mode” on the Management Mode screen in
Administrator setup is set to “AUTO”, files are automatically
uploaded with the signal from the Back-End.
(See “Upload Mode” on page 89.)
Note:
If the SDHC Memory Cards are accessed during automatic
uploading for recording or playback, uploading will be
canceled.
Playback with the remote control panel is not available
at present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.
