Panasonic AG-AC90AP Operating Instructions Manual Download Page 88

Page: 88 / 126

- 88 -

∫

Using the [Eye-Fi Power Management] function

Set the power source for Eye-Fi transfers.

≥

Change the mode to

Select the menu.

≥

The Eye-Fi menu only appears when an Eye-Fi card is used.

≥

The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to
changes to the card specification etc.

≥

Update the firmware of the Eye-Fi card to the latest one using the software supplied with the
Eye-Fi card before use.

≥

When the endless memory function of the Eye-Fi card is set to on, the files transferred from the
card may be deleted automatically.

≥

The Eye-Fi card may heat up as a result of the files being transferred. Note that the use of an
Eye-Fi card accelerates the battery drain, so we recommend you use the card in Playback Mode.

≥

The Eye-Fi setting can be checked while pausing the recording.

* These are displayed only when [Eye-Fi DIRECT] is used.

≥

If the Eye-Fi card is removed and then reinserted into the unit, set functions related to Eye-Fi
again from the menu.

≥

When using the Eye-Fi card, please be sure to unlock the write-protect switch. (

)

≥

Before deleting the files, please confirm they have been transferred to your PC and uploaded to
the sharing site.

≥

Do not use the Eye-Fi card in locations where the use of wireless devices is forbidden, such as
inside aircraft etc.

≥

Depending on network conditions, the transfer may take some time. Also, if network conditions
deteriorate, the transfer may be suspended.

: [SW & DISP SETUP]

[Eye-Fi Power Management]

desired settings

[BOTH]:

Eye-Fi transfers are possible with either the AC adaptor or the battery.

[AC]:

Eye-Fi transfers are possible only when the AC adaptor is in use.

Displayed icons

Eye-Fi setting

[Eye-Fi TRANSFER] is set to [OFF]

(White)/

(White)

[Eye-Fi TRANSFER] is set to [ON] and the unit is not
connected to the network.

(Green)/

(Green)

[Eye-Fi TRANSFER] is set to [ON] and the unit is
connected to the network or is transferring a file.

[Eye-Fi TRANSFER] is set to [ON] and a file transfer
has been interrupted.

AG-AC90A-SQT0333_mst.book 88 ページ２０１４年５月１４日　水曜日　午前１０時３６分

Summary of Contents for AG-AC90AP































































































































Search results

Summary of Contents for AG-AC90AP

Reviews:

Related manuals for AG-AC90AP

Brands by name

Popular brands

Panasonic AG-AC90AP, Operating Instructions Manual

Search results

Summary of Contents for AG-AC90AP

Reviews:

Related manuals for AG-AC90AP

Brands by name

Popular brands