- 53 -
You can set the initial time code.
1
Select the menu.
2
Touch the item to set and change with
/
.
≥
It will be set to 00h00m00s00f when the RESET button is pressed.
≥
“h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.
3
Touch [ENTER].
≥
Touch [EXIT] to complete the setting.
≥
This unit will adjust the time code in accordance with the frame rate of the recording format.
(
) Therefore, it may not be continuous from the previous final time code when the recording
format is changed.
≥
Set the frame to [00] or value that is multiple of 4 when the [REC FORMAT] is set to [PH 1080/
24p]. The time code that is recorded will shift when other values are set.
Setting the User Information
Eight digit hexadecimal alphanumeric can be entered and displayed as a memo information such as
dates, control numbers, etc., into the User Information.
UB 00 00 00 00
You can set the User Information.
1
Select the menu.
2
Touch the item to set and change with
/
.
≥
You can use numbers from 0 to 9 and letters from A to F.
≥
It will be set to 00 00 00 00 when the RESET button is pressed.
3
Touch [ENTER].
≥
Touch [EXIT] to complete the setting.
[TC PRESET]
: [RECORD SETUP]
#
[TC PRESET]
[UB PRESET]
: [RECORD SETUP]
#
[UB PRESET]
MENU
MENU
AG-AC90A-SQT0333_mst.book 53 ページ ２０１４年５月１４日 水曜日 午前１０時３６分
