Panasonic AG-AC30PB Operating Instructions Manual Download Page 6

Page: 6 / 154

- 6 -

Recording to the SD card

A variety of recording functions support recording to the SD card (SDHC Memory Card / SDXC
Memory Card).

≥

This unit supports relay/simultaneous recording using double card slots.

Linking to external devices

Transfer data (files) to perform nonlinear editing on another device (PC, etc.).

≥

This unit supports USB 2.0.

SD cards are optional and not supplied with this unit.

A USB 2.0 cable is not supplied with this unit. Use a commercially-available double-shielded
USB 2.0 cable with a ferrite core.
If possible, we recommend using a cable with a length of 1.5 m (4.9 feet) or less.

Preparation

What you can do with this unit

USB Device Mode







SDHC Memory Card/SDXC Memory Card*

USB 2.0 (Device mode)*

R68S3_PJPB.book 6 ページ２０１６年５月１８日　水曜日　午後１０時３２分

Summary of Contents for AG-AC30PB



























































































































































Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands

Panasonic AG-AC30PB, Operating Instructions Manual

Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands