Panasonic AG-AC30PB Operating Instructions Manual Download Page 127

Page: 127 / 154

- 127 -

The recording lamp lights up during recording. When this is set to [OFF], it does not light during
recording.

Set date and time. (

)

Set the time difference from Greenwich Mean Time. (

)

The ring LED lights up blue in Recording Mode.

≥

When [5 SEC.] is set, the ring LED lights up for 5 seconds after the unit is turned on or the
Recording Mode is switched.

≥

When [RING LED (RED)] is set to [ON], the ring LED lights up red during recording.

The ring LED lights up red during recording.

≥

When the [REC LAMP] is set to [OFF], this item cannot be set.

The unit is put into recording pause approx. 1 second when the unit is turned on.

≥

Depending on the recording conditions, start time may be longer than 1 second.

≥

In the Quick Power On Mode, the zoom magnification becomes approx. 1

Touch screen operation, start and stop of recording can be confirmed with this sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.

2 Beeps for 4 times

When an error occurs. Check the message displayed on the screen. (

134

)

[REC LAMP]

[ON]/[OFF]

[CLOCK SET]

[TIME ZONE]

[RING LED (BLUE)]

[ON]/[5 SEC.]/[OFF]

[RING LED (RED)]

[ON]/[OFF]

[QUICK POWER ON]

[ON]/[OFF]

[ALERT SOUND]

[OFF]/

(Volume low)/

(Volume high)

R68S3_PJPB.book 127 ページ２０１６年５月１８日　水曜日　午後１０時３２分

Summary of Contents for AG-AC30PB



























































































































































Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands

Panasonic AG-AC30PB, Operating Instructions Manual

Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands