Panasonic AG-AC30PB Operating Instructions Manual Download Page 121

Page: 121 / 154

- 121 -

Switches the output setting of time code information when this unit is connected to another device
(HDMI-SDI converter, etc.) with an HDMI cable.

≥

When performing remote recording with the [AUTO REC] USER button function, select [ON].
(

)

≥

(In Playback Mode)
Touch the play mode select icon, and set this unit to Motion Picture Playback Mode. (

)

Select the sound heard through the headphone terminal and AUDIO OUT terminal.

≥

When an HDMI cable is connected to this unit, even if you select [LIVE], sound will be output
according to [RECORDING].

When [ON] is selected, you can adjust the headphone volume in Recording Mode with the jog dial.
(

)

Selects the test tone output when color bars are displayed. (

)

This sets how to turn on/off the LCD monitor and viewfinder. (

)

[HDMI TC OUTPUT]

[ON]/[OFF]

[H/PHONE MODE]

[LIVE]:

The sound which has been input from the microphone is output as is.
This setting is selected when delays in the sound are annoying.

[RECORDING]:

The sound in the status which is to be recorded (the sound synchronized
with the images) is output.

[VOLUME]

[ON]/[OFF]

[TEST TONE]

[OFF]:

Does not output a test tone.

[LEVEL 1]:

Outputs a high volume test tone.

[LEVEL 2]:

Outputs a low volume test tone.

[LCD/EVF OUTPUT]

[LCD]/[EVF]

R68S3_PJPB.book 121 ページ２０１６年５月１８日　水曜日　午後１０時３２分

Summary of Contents for AG-AC30PB



























































































































































Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands

Panasonic AG-AC30PB, Operating Instructions Manual

Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands