Panasonic AG-AC30, Operating Instructions Manual

Page: 81 / 161

- 81 -
Zebra
You can switch between the zebra display and marker display.
Touch .
Each time the icon is selected, the indication changes in the following order:
Zebra 1
# Zebra 2
*
# Marker
*
# setting canceled
* It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF]. ( l 130 )
≥
You can also use this function with a USER button. ( l 78 )
Zebra display:
Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts)
are displayed with diagonal lines (zebra pattern
A
).
Marker display:
Displays the luminance level of the center of the screen (luminance display frame
B
) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance level of
the object, when recording same object in different surroundings.
≥ Luminance level
C
is displayed between 0% and 99%. It will be displayed as 99% when it is
over 99%.
≥ This item cannot be set during Freeze Frame. ( l 71 )
≥
You can record an image with little white saturation if you manually adjust the shutter speed or
brightness not to display zebra pattern. (
l 53 , 57 )
≥
The zebra pattern does not appear on the images actually recorded.
≥ It is also possible to adjust the level of the zebra pattern to be displayed. ( l 130 )
≥
It is also possible to change the [ZEBRA MODE] setting to change the display time for the zebra
pattern display. (
l 122 )
(When Zebra 1 is set) (When Marker is set)
ZEBRA

99%


R68S3_PJPB.book 81 ページ ２０１６年９月２日 金曜日 午前１０時４３分