40
Synchro scan
The synchro scan shutter speed used when the
shooting screens such as a television screen or
computer monitor is set using the <SHTR/F.RATE>
dial (Page 37), or the [SYNCHRO SCAN] item on the
setup menu [SCENE FILE] screen. (Page 83)
•
Adjust the shutter speed to match the frequency
of the television or computer monitor to minimize
the horizontal noise that appears when shooting
such subjects.
•
By switching to progressive mode, you can also
shoot the PAL system television screens.
•
If the set value of the [SYNCHRO SCAN] item
on the setup menu [SCENE FILE] screen is
displayed in gray, it cannot be used with the
current recording format. This function will only
operate for preset values for each recording
format.
The preset values for each recording format are
as follows. ([SYNC SCAN TYPE] = [sec])
60i/60P mode: 1/60 second
30P mode: 1/30 second
24P mode: 1/24 second
50i/50P mode: 1/50 second
25P mode: 1/25 second
• You can change the progressive mode with
the [REC FORMAT] item on the setup menu
[RECORDING SETUP] screen. (Page 89)
