Panasonic AFPXHEAD4, User Manual

Page: 24 / 76

2.3 Wiring to the Connector
2.3.1 Suitable Parts and Tools
A spring connection type is used for the terminal block of the analog I/O section. Perform wire
connection properly by referring to the compatible products listed in the following tables.
Compatible wires (stranded wire)
Size Nominal cross-sectional area
AWG24 to AWG16
0.2 mm
2
to 1.5 mm
2
Rod terminals with compatible insulation sleeve
Manufacturer Cross-sectional
area Size Model number
Phoenix Contact Co., Ltd.
0.25 mm
2
AWG24 AI 0,25-6 YE
0.50 mm
2
AWG20 AI 0,5-6 WH
0.75 mm
2
AWG18 AI 0,75-6 GY
1.00 mm
2
AWG18 AI 1-6 RD
Crimping tool dedicated to rod terminals
Manufacturer Model number Product No.
Phoenix Contact Co., Ltd. CRIMPFOX UD 6 1204436
2.3.2 Wire Connection Method
Perform wire connection of the terminal block according to the following procedure.
1.
Strip the sheath from the electric wire.
10 mm
2.
While pressing the tab on the terminal block using a flat-blade screwdriver, insert the wire
all the way until it stops. Confirm that the electric wire is fixed in place when the screwdriver
is released.
2.3 Wiring to the Connector
2-8 WUME-FPXHAIO-01