Panasonic 3000, Operating Instructions Manual

Page: 36 / 138

INSTALLING YOUR MACHINE
36
Using a PC to Update the Auto Dialer Remotely
This feature provides a convenient and an easy way to Update, Backup or Restore the Phone Book dialing
numbers right from your PC by sending a text email message to the DP-2500/3000.
The DP-2500/3000 interprets the command that you enter in the "Subject:" line of your email message and
performs one of the following functions, it Retrieves or Stores data into the Auto Dialer (Phone Book).
The two types of commands that can be entered in the "Subject" line of your email:
1) To Store data, type : #set abbr(password)# : Where the "password" is the Remote Password
programmed in the DP-2500/3000’s User Parameters (i.e.
123456789). You can program any known unused Auto
Dialer location(s) with this command for the first time,
without having to Retrieve the Phone Book data first. If the
desired Auto Dialer location already contains data, the DP-
2500/3000 will overwrite the existing data, therefore, we
recommend that you use the Retrieve command below
instead. To edit existing Auto Dialer locations, refer to pages
42 to 43.
2) To Retrieve data, type : #get abbr(123456789)#
(see Note 1)
NOTE
1. To activate this feature, change the Fax Parameter No. 158 (PC REMOTE UPDATE) to "Valid".
(See page 57).
Programming or Retrieving Parameters via Email