Note:
R
“
Check tel line2
”
is displayed on the unit.
To erase it, see page 64.
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact your DSL/
ADSL provider) to the telephone line between the
base unit and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function properly.
To connect to a 2-line telephone jack
Example:
DSL/ADSL line is line 2
Connect the “Transparent” plug telephone line
cord (2-wire cord) (
1
) to the 2-line splitter
(
3
) until you hear a click.
Connect the “
GREEN
” plug telephone line
cord (4-wire cord) (
2
) to a DSL/ADSL filter
(not supplied) (
4
), then to the 2-line splitter
(
3
) until you hear a click.
Connect the 2-line splitter (
3
) to the 2-line
telephone jack (RJ14C) (
5
) until you hear a
click.
1
2
5
4
2
1
3
“
GREEN
”
plug
“Transparent”
plug
*DSL/ADSL filter (not supplied) is required if you
have DSL/ADSL service.
To connect to 2 single-line telephone jacks
Example:
DSL/ADSL line is line 2
Connect the “Transparent” plug telephone line
cord (2-wire cord) (
1
) to the unit, then to the
single-line telephone jack (RJ11C) (
2
) until
you hear a click.
Connect the “
GREEN
” plug telephone line
cord (4-wire cord) (
3
) to a DSL/ADSL filter
(not supplied) (
4
), then to the single-line
telephone jack (RJ11C) (
5
) until you hear a
click.
1
2
2
5
4
3
1
“Transparent” plug
“
GREEN
”
plug
*DSL/ADSL filter (not supplied) is required if you
have DSL/ADSL service.
Battery installation
R
USE ONLY Ni-MH batteries AAA (R03) size
(
A
).
R
Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R
Confirm correct polarities (
,
).
1
R
Follow the directions on the display to set up
the unit.
10
For assistance, please visit http://shop.panasonic.com/support
Getting Started
KX-TG954x_955x_OI(en)_0507_ver432.pdf 10
2018/05/07 14:00:40
