Panametrics VeriDri, User Manual, Page: 16 / 22

Specifications
8 VeriDri™ User’s Manual
• Max. Loop Resistance: R = 50   (PSV–7), where PSV = Power Supply Voltage
Example: For a PSV = 24 VDC, R = 50   (24–7) = 850 
• Cable: 2 m, standard (consult factory for custom lengths)
7.3 Mechanical Specifications
Sample Connection
3/4-16 straight, male thread with o-ring
Operating Pressure
5

m Hg to 5,000 psig (345 bar)
Enclosure
Type 4X/IP67
European Compliance
See the EC Declaration of Conformity at the end of this manual
Dimensions
• Overall: 8.51  1.125 in. (21.62  2.86 cm)
• Electronics Module w/cable: 5.93

1.125 in. (15.06

2.86 cm)
• Weight: 5 oz (140 g)
7.4 Moisture Sensor Specifications
Sensor Type
Thin-film aluminum oxide moisture sensor probe
Calibration
Each sensor is individually computer-calibrated against known moisture concentrations, traceable to NIST
Calibration Interval
Factory sensor recalibration by Panametrics is recommended every
6-12 months, depending on the application
Calibration Data
Factory-calibrated, stored in FLASH memory
Flow Rate
• Gases: Static to 10,000 cm/s linear velocity, at a pressure of 1 atm
• Liquids: Static to 10 cm/s linear velocity, at a density of 1 g/cc
3/4-16 UNF-2A
2.58 [65.53] 2.58 [65.53]
1.125 [28.58]
3.35 [85.10]
MIN
CABLE BEND
ALLOWANCE