Panametrics TMO2D, User Manual, Page: 37 / 101

TMO2D User’s Manual 29
Chapter 4. Basic Programming
4.4.8 Set Error Handling?
The
Set Error Handling? submenu enables the TMO2D to handle inputs it receives that are outside its measurement
range.
Based on directions it receives, the TMO2D can show the errors on the display and force an output high or low.
If you select any choice except
Force to Value?, the program returns to the Set Output Response? entry. The Force to
Value? selection enables you to choose a value to which the output will go when a system error occurs. The mA value
must be set between 0 and 25 mA. If you select
Force to Value?, the program asks for two more entries.
SETUP MENU
Set Error Handling?
Press [YES] to enter the Error Handling submenu.
Enable Error Handling
[YES] no
Use the [NO] or arrow keys to select [YES] to enable Error Handling. Press [YES] to
confirm the selection. (Selecting [NO] returns the display to the Setup Menu.)
System Error Effects
Set Display Response?
Press [YES] to enter the Display Response submenu.
Display System Error?
[YES] no
Use the [NO] or arrow keys to select if the display will show errors. Press [YES] to
confirm the selection.
System Error Effects
Set Display Response?
Press [NO] to proceed to the next submenu.
SYSTEM ERROR EFFECTS
Set Output Response?
Press [YES] to enter the Output Response submenu.
Select Output Effect:
No effect?
Force high?
Force low?
Force to value?
Hold last value?
Use [NO] or the arrow keys to scroll through the choices for output responses.
When you have reached the desired response, press [YES] to confirm the selection.
Output A, Error Value:
mA Value [X.XX]:
Use the numeric keys to enter the desired value. (The number in brackets
represents the previously entered value.) Press [YES] to enter the value, and [YES]
again to confirm the entry.
Output B, Error Value:
mA Value [X.XX]:
Use the numeric keys to enter the desired value. Press [YES] to enter the value, and
[YES] again to confirm the entry.
System Error Effects
Set Output Response?
Press [NO] to proceed to the final submenu.