Panametrics Sentinel LCT, User Manual

Page: 233 / 248

Sentinel LNG User’s Manual 221
Appendix C. Data Records
Appendix C. Data Records
C.1 Site Data
After the
Sentinel LNG
flow transmitter has been installed, specific site data must be entered via the
User Program
, prior
to operation. Record that information in Table 36 below.
General Information
Model # Serial #
Software Vers. Setup Date
Channelx-Status
Channel 1 Channel 2 (if applicable)
Channel Status
Off
1
On
Channel Status
Off
1
On
Channelx-Pipe Parameters
Channel 1 Channel 2 (if applicable)
Trans. Type Clamp-On Trans. Type Clamp-On
Transducer # Transducer #
Other Transducers Other Transducers
Wedge Temp Wedge Temp
Frequency (Hz) Frequency (Hz)
Tw (µs) Tw (µs)
Wedge Angle (°) Wedge Angle (°)
Wedge Sndspd Wedge Sndspd
Pipe Material Pipe Material
All Clamp-On Transducers All Clamp-On Transducers
Pipe O.D. Pipe O.D.
Pipe Wall Pipe Wall
Path Length (P) Path Length (P)
Axial Length (L) Axial Length (L)
Lining Yes No Lining Yes No
Lining Material Lining Material
Lining Sndspd Lining Sndspd
Lining Thickness Lining Thickness
Track. Window. Yes No Track. Window. Yes No
Fluid Type Fluid Type
Other/Sndspd Other/Sndspd
Reynolds Corr. Off Active Reynolds Corr. Off Active
KV Input Sel. Table Static KV Input Sel. Table Static
Kin. Visc. Kin. Visc.
Cal. Factor Cal. Factor
# of Traverses # of Traverses
Trans. Spacing Trans. Spacing
Channelx-Error Limits