Panametrics PanaFlow MV80, User Manual, Page: 62 / 184

Chapter 2. Installation
50 PanaFlow™ MV80, MV82 & MV84 User’s Manual
Figure 55: External 4-20 mA Input and RTD Wiring - High Power
2.6.7.4 Optional Energy EMS External 4-20 mA Input and RTD Wiring
Figure 56: Energy EMS External 4-20 mA Input and RTD Wiring - High Power
2.6.7.5 Optional Contact Closure Input Wiring
Refer to Figure 57 below to wire an external switch input into the flow meter. The meter is configured to have Option 1
used for the external input. If the above switch is used to remotely reset the totalizer, a pushbutton switch with a
momentary contact closure is recommended.
1 2 3 4 5 1 2 3 4 5
Option 1 Option 2
Figure 57: Optional Contact Closure Input Wiring