Panametrics flare.IQ Generation 2, Operation And Maintenance Manual

Page: 17 / 50

3.3 Configuration
The web console application can be used to
configure the flare.IQ during initial commissioning
as well as to monitor performance of various
components of the software such as flare control
and digital verification. This secure web console
can be launched from a supported web browser
running on a host PC connected to the configure/monitor
(ethernet 1) switch on the top module. From your web
browser enter <ip address>/fiqWeb to launch the web
console. If you leave off /fiqWeb, a default page will
load that has a link to the web console page. The
login screen of the web console application is
shown in figure 11 below.
Figure 11: Log in screen of the web console application
17