Panametrics DigitalFlow XMT868i, Programming Manual

Page: 59 / 164

DigitalFlow™ XMT868i Programming Manual 9
Chapter 2. Displaying Data
2.3.4.1 Reading Transducer Signals
3. To read a signal from the meter, click on the [Read Signals] button. (If the meter is a multi-channel instrument,
open the Channel drop-down menu and click on the desired channel.) After a moment, the Properties window
appears similar to Figure 7.
Figure 7: Active Signal Options
4. To select a different signal type, open the signal menu at the right (shown here with Raw Upstream highlighted)
and click on the desired signal.
2.3.4.2 Plotting Transducer Signals
To plot the selected signal, click on [Plot] . A graphical window opens, as shown in Figure 8.
Figure 8: Signal Graph Window