Chapter 1. Programming Site Data
2
DigitalFlow™ XMT868i Programming Manual
1.2.1
Keypad Program
Along with the 2-line, 16-character LCD, the XMT868i includes a 6-key infrared keypad.The decal cutout for each key
contains an infrared transmitter LED, an infrared phototransistor and a visible red LED. If an operator presses his finger
or other reflective object against the glass, directly over a key, infrared light from the emitter is redirected back
through the enclosure window to the sensor. Use the infrared keypad to navigate through the user program. The
menu map may be followed in sequence, or the four arrow keys may be used to scroll through the prompt screens.
Figure 1 shows the front of the XMT868i, with the infrared keypad.
Figure 1: XMT868i Enclosure Screen
Programming of the
ACTIV, SYSTM
,
and
PIPE
submenus of the
CHx
menus and the
GLOBL-SYSTM
menu are required
for basic operation of the Model XMT868i. Failure to accurately enter all of the necessary information will result in
unreliable flow data. Therefore, be sure to complete at least the sections of this chapter pertaining to those three
submenus.
Note:
Because it is so essential, instructions for programming the
ACTIV, SYSTM
,
and
PIPE
submenus of the
CHx
menus and the
GLOBL-SYSTM
submenus are also included in the
Startup Guide.
If that programming has
already been completed, skip those sections in this chapter.
Except for the three submenus noted above, it is not necessary to program the Model XMT868i flowmeter in any
particular order. Therefore, the sections of this chapter need not be completed in sequence. Enter the keypad
program as described in
Accessing the Keypad Program
on the next page and proceed immediately to any section
of interest.
Note:
Be sure to record all the programming data entered in this chapter in Appendix B,
Data Records.
D
S
O
R
UV I R
N
E
PA
T
U
O
S
S
E
O
I
NS
N
O
P
O
OT
N
EN WH
SE
D
ER
N
E
I LE
G
I
DigitalFlow™
Liquid Flow Transmitter
Panametrics XMT868i
Escape
Enter
Summary of Contents for DigitalFlow XMT868i
