Chapter 2. Initial Setup
30
DigitalFlow™ XGS868i Startup Guide
2.4 Entering Data in the Global Menu
To begin programming your meter, you must select the system units from the
GLOBL
menu as discussed below. Refer
to Figure 15 on page 39 and remember to record all programming data in Appendix B,
Data Records.
Note:
Refer to the Programming Manual for information on the other submenus in the
GLOBL
menu.
2.4.1
Entering Global System Data
The
GLOBL-SYSTM
submenu is used to enter several general system parameters (e.g., English or metric units). For
units with 2 channels, this menu is also used to compute parameters such as the sum, difference or average of the
channel 1 and channel 2 signals. When calculating the
SUM
,
DIF
or
AVE
readouts, data from the
GLOBL-SYSTM
submenu is used. Any conflicting data entered in the
CHANNEL-SYSTM
submenu is overridden.
1.
In the
Keypad Program, scroll to
PROG a
nd press
[Enter]
.
2.
In the
PROG
menu, scroll to
GLOBL
and press
[Enter]
.
3.
In the
Global PROGRAM
menu, scroll to
SYSTM
and press
[Enter]
.
4.
Scroll to the desired
System Units selection (either metric or English) and press
[Enter]
.
The XGS868i will display all
parameters and measurements in the designated units.
5.
Scroll to the desired
Pressure Units selection (absolute or gauge) and press
[Enter]
.
6.
Do one of the following:
• If PSIa (absolute) was selected, proceed to Step 7.
• If PSIg (gauge) was selected, enter the desired atmospheric pressure, press
[Enter]
and proceed to Step 7.
7.
Do one of the following:
• For a single-channel XGS868i, the program returns to the
Global PROGRAM
menu.
• For a 2-channel meter, proceed to Step 1 on the next page.
Summary of Contents for DigitalFlow XGS868i
