Panametrics DigitalFlow GS868, Programming Manual, Page: 114 / 146

104 DigitalFlow™ GS868 Programming Manual (2-Channel)
C.7.2 Reading Transducer Signals
To read a Signal from the meter:
1. Click on the Read Signals button. (If the meter is a multi-channel instrument, open the Channel drop-down menu
and click on the desired channel.) After a moment, the
Properties window appears similar to Figure 28 below.
Figure 28: Active Signal Options
2. To select a different signal type, open the signal menu at the right (shown here with
Raw Upstream highlighted)
and click on the desired signal.
C.7.3 Plotting Transducer Signals
To plot the selected signal, click on Plot. A graphical window opens, as shown in Figure 29 below.
Figure 29: Signal Graph Window
C.7.4 Saving Transducer Signals
To
save the raw signal, click Save. A window opens similar to that shown in Figure 30 below. Enter the desired name,
and click
Save to save the signal as a text file.