DigitalFlow™ DF868 Multipurpose Ultrasonic Liquid Flowmeter Programming Manual (2-Channel)
117
Appendix C. Programming with PanaView
C.6 Editing Meter Properties
Through PanaView, you can edit the properties of your DF868. You can:
•
Set the meter clock, or synchronize it with the PC clock
•
Read, plot and save transducer signals
•
Clear totalizers
•
Save site files to the meter or PC
•
Clear sites from the meter
•
Print site files to the PC
To edit the properties of your DF868:
1.
Highlight the meter (as shown in Figure 23 on page 116).
2. Open the
“Edit”
menu and select the
“Properties”
option, as shown in Figure 25.
Figure 25:
Properties
Option in the
Edit
Menu
The window appears similar to Figure 26. To perform a specific task, refer to the appropriate section on the following
pages.
•
Setting the Meter Clock (page 119)
•
Reading Transducer Signals (page 120)
•
Plotting Transducer Signals (page 121)
•
Saving Transducer Signals (page 121)
•
Clearing Totalizers (page 121)
•
Handling Site Files (page 122)