background image

INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference

Burner conforms to:  ANSI Z21.97/CSA 2.41 - (2012/10/01) “Outdoor Decorative Gas Appliances”

We recommend that our fire pits be 

installed and serviced by professionals 

that are certified in the U.S. by NFI 

(National Fireplace Institute)

DANGER - IF YOU SMELL GAS

1. Shut off gas to the appliance. 

2. Extinguish any open flame. 

3. If odor continues, keep away from the appliance and immediately call your gas  

 

    supplier or fire department.

WARNING

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this 

or any other appliance.  An LP-cyllinder not connected for use shall not be stored in the 

vicinity of this or any other appliance.

CARBON MONOXIDE HAZARD

This appliance can produce carbon monoxide which has no odor. 

Using it in an enclosed space can kill you. 

Never use this appliance in an enclosed space such as a camper, tent, car 

or home.

WARNING:

Improper installation, adjustment, alteration, service or maintenance can cause injury 

or property damage. Read the installation, operating and maintenance instructions 

thoroughly before installing or servicing this equipment.

WARNING: FOR OUTDOOR USE ONLY!

DANGER

ROBATA 72 & 54 CONCRETE

Electronic Ignition 

Instal Owner's Manual

Summary of Contents for Robata 54 Concrete



















Reviews: