PaloAlto Networks Prisma SD-WAN ION 9000, Hardware Reference Manual

Page: 24 / 34

24
ION 9000 HARDWARE REFERENCE | ION 9000 Overview
Power on the ION 9000
Connect the power cables to the ION device and plug the device power cable into an AC power outlet.
When you switch on the power, the device is powered on and the power indicator turns green.
Shut down the ION 9000
Shut down the ION 9000 in the following ways:
•
Shut down using the Device Toolkit commands
Run the device toolkit command
debug shutdown
to shut down the device.
Ensure the device is physically accessible to turn it back on, before executing the
command.
• Shut down using the Power Switch
Press the power switch 5 times (press and hold for 1 second, then, release) to shut down the device.
Reboot the ION 9000
Press the power switch 3 or 4 times to reboot the ION 9000.