PaloAlto Networks PA-400 Series, Hardware Reference Manual

Page: 59 / 60

PA-400 SERIES NEXT-GEN FIREWALL HARDWARE REFERENCE | PA-400 Series Firewall Compliance Statements
Overview
59
©
2021 Palo Alto Networks, Inc.
PA-400 Series Firewall Compliance Statements
The following lists the PA-400 Series firewall hardware compliance statements:
•
VCCI : This section provides the compliance statement for the Voluntary Control Council for Interference
by Information Technology Equipment (VCCI), which governs radio frequency emissions in Japan.The
following information is in accordance to VCCI Class B requirements:
Translation: This is a Class B product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take corrective actions.
• CE : European Union (EU) Electromagnetic Compatibility Directive.This device is herewith confirmed to
comply with the requirements set out in the Council Directive on the Approximation of the Laws of the
Member States relating to Electromagnetic Compatibility Directive (2014/30/EU). The above product
conforms with Low Voltage Directive 2014/35/EU and complies with requirements relating to electrical
equipment designed for use within certain voltage limits.
• KCC :
• TUV : Product Ambient Temperature: 0~40 degree C
Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery
according to local regulations.
• Federal Communications Commission (FCC) statement for a Class B digital device or peripheral : This
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit that is different from the one to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
• ICES : Canadian Department Compliance Statement: This Class B digital apparatus complies with
Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.