background image

PA-1400 Series Firewall Hardware Compliance Statements

PA-1400 Series Firewall Compliance Statements

The following are the PA-1400 Series firewall hardware compliance statements:

BSMI EMC Statement

—User warning: This is a Class A product. When used in a residential

environment it may cause radio interference. In this case, the user will be required to take

adequate measures.

Manufacturer

—Flextronics International.

Country of Origin

—Made in the USA with parts of domestic and foreign origin.

CE (European Union (EU) Electromagnetic Compatibility Directive)

—This device is herewith

confirmed to comply with the requirements set out in the Council Directive on the

Approximation of the Laws of the Member States relating to Electromagnetic Compatibility

Directive (2014/30/EU).
The above product conforms with Low Voltage Directive 2014/35/EU and complies with the

requirements relating to electrical equipment designed for use within certain voltage limits.

Federal Communications Commission (FCC) statement for a Class A digital device or

peripheral

—This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit that is different from the one to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

ICES (Canadian Department Compliance Statement)

—This Class A digital apparatus complies

with Canadian ICES-003.

French translation

: Cet appareil numérique de la classe A est conforme à la norme NMB-003

du Canada.

Korean Communications Commission (KCC) Class A Statement

—This equipment is an

electromagnetic compatible device for business purposes (Class A). The provider or user should

be aware that the equipment is intended for use outside the home.

Technischer Überwachungsverein (TUV)

Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery

according to local regulations.

PA-1400 Series Next-Gen Firewall Hardware Reference

44

©

2022 Palo Alto Networks, Inc.

Summary of Contents for PA-1400 Series















































Reviews: