PaloAlto Networks M-200, Hardware Reference Manual, Page: 26 / 52

Install M-200 or M-600 Appliance in an Equipment Rack
Install the M-200 Appliance in a 19” Equipment Rack
The following procedure describes how to install the M-200 appliance in a four-post equipment
rack. The rack kit includes the hardware required to install the appliance in most equipment racks.
Extra screws and washers are included.
STEP 1 | Aach the inner rail sets (two each) to each side of the appliance by aligning the square holes
on each rail with the rail hooks on the appliance and then sliding the rails toward the front of
the appliance to engage the hooks. Secure the back inner-rails using two M4 screws for each
rail and secure the front inner-rails using one M4 screw for each rail.
The inner-rails also use pressure-lock clips that lock the rails to the appliance. Remove
the two M4 screws and pull the metal tab on the clips to remove the rail from the
appliance.
STEP 2 | Install one outer rack-mount rail assembly (two rails each) on each side of the equipment
rack. Push the rail buons in on the ends of the rails, insert the studs in to the square rack
M-200 and M-600 Appliance Hardware Reference 26
©
2021 Palo Alto Networks, Inc.