PaloAlto Networks M-200, Hardware Reference Manual, Page: 20 / 52

M-200 and M-600 Appliance Overview
M-600 Appliance Back Panel
The following image shows the back panel of the M-600 appliance and the table describes each
back-panel component.
Item Component Descripon
1 System drive 240GB solid-state drive (SSD) used to store the
operang system files and system logs.
2 Power supplies Use the AC power supply inputs to connect power
to the appliance. The second power supply is for
redundancy.
3 Ethernet ports Four RJ-45 10Mbps/100Mbps/1000Mbps Ethernet
ports. While facing the back of the appliance, the
ports are labeled as follows:
The port labels are located on top of the
appliance.
• Upper le —Management (MGT) port used for
managing the appliance and for data traffic.
• Upper right —Ethernet1/1
• Lower le —Ethernet1/2
• Lower right —Ethernet1/3
For informaon on configuring these ports, refer
to the Panorama
™
Administrator’s Guide on the
Technical Documentaon Portal for the release
version running on your appliance. If the appliance
is in PAN-DB mode, refer to the appropriate
release-specific PAN-OS
®
Administrators Guide.
4 USB ports Not used.
M-200 and M-600 Appliance Hardware Reference 20
©
2021 Palo Alto Networks, Inc.