PaloAlto Networks M-200, Hardware Reference Manual, Page: 19 / 52

M-200 and M-600 Appliance Overview
Item Component Descripon
because a power supply failed or because there
is no power source connected to the power
supply).
• Solid blue —The UID feature is acvated (see the
UID buon descripon for the M-600 Appliance
Back Panel .)
7 Hard-disk drives (HDDs) Disk drive bays and HDDs used for log storage. By
default, the M-600 ships with four HDDs installed
in drive bays A1/A2 and B1/B2. You can install up
to eight addional drives (four addional RAID 1
pairs) in the remaining drive bays (C1/C2, D1/D2,
E1/E2, and F1-F2) to increase log storage capacity.
Each pair of drives are in a RAID 1 configuraon.
For example, A1-A2 is a RAID 1 pair and B1-B2 is a
RAID 1 pair.
For details on storage capacity, refer to the
Panorama Datasheet . For details on adding
addional storage to the appliance, refer the
Panorama Administrator’s Guide on the Technical
Documentaon Portal for the release version
running on your appliance.
8 Hard-disk drive (HDD) LEDs Status LEDs—two for each log drive:
•
Top LED —Flashing blue indicates drive acvity.
• Boom LED —Solid red indicates a log drive
failure.
M-200 and M-600 Appliance Hardware Reference 19
©
2021 Palo Alto Networks, Inc.