PaloAlto Networks M-200, Hardware Reference Manual, Page: 16 / 52

M-200 and M-600 Appliance Overview
M-200 Appliance Back Panel
The following image shows the back panel of the M-200 appliance and the table describes each
back-panel component.
Item Component Descripon
1 Power supplies Use the AC power supply inputs to connect power
to the appliance. The second power supply is for
redundancy.
2 Ethernet ports Four RJ-45 10Mbps/100Mbps/1000Mbps Ethernet
ports. While facing the back of the appliance, the
ports are labeled as follows:
The port labels are located on top of the
appliance.
• Upper le —Management (MGT) port used for
managing the appliance and for data traffic.
• Upper right —Ethernet1/1
• Lower le —Ethernet1/2
• Lower right —Ethernet1/3
For informaon on configuring these ports, refer
to the Panorama
™
Administrator’s Guide on the
Technical Documentaon Portal for the release
version running on your appliance.
3 USB ports Not used.
4 IPMI port Not used.
5 Console port Use this port to connect a management computer to
the appliance using a 9-pin serial cable and terminal
emulaon soware.
The console connecon provides access to
appliance boot messages, the Maintenance
Recovery Tool (MRT), and the command line
interface (CLI).
M-200 and M-600 Appliance Hardware Reference 16
©
2021 Palo Alto Networks, Inc.