PaloAlto Networks M-200, Hardware Reference Manual, Page: 15 / 52

M-200 and M-600 Appliance Overview
Item Component Descripon
6 Power LED Solid green indicates that the appliance is powered
on.
7 Reset buon Press this buon to reboot the appliance.
8 Power buon Press this buon to power on or power off the
appliance. Powering off the appliance with this
buon puts the appliance in standby power mode.
To completely power off the appliance, you must
disconnect the AC power cords from both power
supplies.
9 Hard-disk drives (HDDs) Disk drive bays and HDDs used for log storage. By
default, the M-200 ships with four HDDs installed
in drive bays A1/A2 and B1/B2. Each pair of drives
are in a RAID 1 configuraon (A1-A2 is a RAID 1
pair and B1-B2 is a RAID 1 pair).
For details on storage capacity, refer to the
Panorama Datasheet .
10 Hard-disk drive (HDD) LEDs Status LEDs—two for each log drive:
•
Top LED —Flashing blue indicates drive acvity.
• Boom LED —Solid red indicates a log drive
failure.
M-200 and M-600 Appliance Hardware Reference 15
©
2021 Palo Alto Networks, Inc.