ION 1200-S Overview
ION 1200-S LEDs
Refer to the ION 1200-S device front panel images for position of the LEDs on the ION 1200-S
devices and its description.
LEDs
ION 1200-S
Power
• Green LED indicates the device is powered on.
• Red LED indicates that the device is not getting enough
power.
Operating System Status
• Green LED indicates OS is running.
• Red LED indicates secure boot has failed.
Controller
• Green LED indicates that the device is connected to the
controller.
• Red LED indicates the device is attempting to connect to
the controller.
Link Activity
On ethernet ports, the right LED displays the link activity. The
LED blinks when there is activity detected on the link.
Link Speed
On ethernet ports, the left LED displays the link speed on the
port.
• Off—No link or speed is 10Mbps.
• Green—Link detected and speed is 100Mbps.
• Yellow—Link detected and speed is 1Gbps.
The following table describes the cellular LED.
Cellular LED
Cellular ION Device
Cellular
The device cellular LED indicates the signal strength.
• Off—No modem detected.
ION 1200-S Hardware Reference
32
©
2023 Palo Alto Networks, Inc.
Summary of Contents for ION 1200-S
Page 1: ...ION 1200 S Hardware Reference docs paloaltonetworks com...
Page 4: ...Table of Contents ION 1200 S Hardware Reference 4 2023 Palo Alto Networks Inc...
Page 12: ...Before You Begin ION 1200 S Hardware Reference 12 2023 Palo Alto Networks Inc...
Page 48: ...Install ION 1200 S ION 1200 S Hardware Reference 48 2023 Palo Alto Networks Inc...
