Getting started with the module for OEM
7
Getting started with the module for OEM
2.2
Heat transfer
IC17 which is used for the 100 mA range, may dissipate about 1 Watt or even higher when the output
current limit is set higher.
It is therefore required to make a thermal connection from the bottom side of the PCB to something
which can absorb heat, for instance using the thermal pad WX-3009-0227-6 from 3M.
Suggested heatsinks:
Heatsink 24-pin DIP Glue-On BLK (508500B00000G) available on
An adhesive heat sink like BGA-STD-015 is available from Farnell (2084425).
When using the 100 mA range, it is required to make a thermal connection
from the bottom side of the PCB to something which can absorb heat like a
housing or heat sink.
Summary of Contents for EmStat3+
Page 3: ......