Palmgren 9682096A, Operating Manual & Parts List

Page: 20 / 33

Page 8
GU1 GB
2 Technical specification
The following information represents the dimensions and indications of weight and the manu-
facturer‘s approved machine data.
Emission measurement
The generation of noise emitted by the capture device is 89 dB(A) to 92 dB(A), measured at a
distance of one meter from the machine and at a height of 1.6m.
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. The noise behaviour of the machine might change depending on the age
and wear of the machine.
Furthermore, the noise emission also depends on production engineering factors, e.g. speed,
material and clamping conditions.
INFORMATION
The mentioned numerical value is the emission level.
Though there is a dependency between the degree of the noise emission and the degree of the
noise disturbance it is not possible to use it reliably to determine if further precaution measures
are required or not.
The following factors influence the actual degree of the noise exposure of the operator:

Characteristics of the working area, e.g. size or damping behaviour,

other noise sources, e.g. the number of machines,

other processes taking place in proximity and the period of time, during which the operator
is exposed to the noise.
Furthermore, it is possible that the admissible exposure level might be different from country to
country due to national regulations.
Electrical connection

Part no.
9686003 115
V ~
6
0Hz
Blower engine power 1.
5 HP
Speed of the blower [ rpm ] 2
2
000
Carrying capacity of the machine sub-
structure Max. 70 kg
Dust container volume 1.8 litres
Filter surface of exhaust air filter
Filament fine filter 0.061 m
2
Weight of the machine substructure 40 kg
Utility space on the machine substructure

Depth 287mm

Width 340mm