Version 1.1.4 dated 2015-3-30
Page 50
Original operating instructions
BF46 Vario | BF46TC
US
INFORMATION
The spindle bearing is lifetime-lubricated. It is not necessary to lubricate it again.
5.3
Repair
Repairs must be carried out only by qualified technical staff; and must follow the instructions
and guidelines given in this manual. Should technical assistance be required, contact
C.H.HANSON
at
(630) 785-6437
.
Company
and
C.H.HANSON
are not liable for, nor do they guarantee
against, damage or
operating malfunctions resulting from alteration, abuse, lack of main-tenance or this
product’s use for other than its intended purpose. Failure to read and follow this
operating
manual is not covered.
For repairs only use
Proper and suitable tools,
Parts purchased from
company
, or its authorized agent.
As required
V-ledges
Readjusting
Z axis:
Fig.5-6: Column and mill head
Proceed as described under "Readjusting X and Y axis".
Interval
Where?
What?
How?
Regulating screw V-ledge
Z-axis top
Regulating screw V-ledge
Z-axis bottom
