6
8
7
1
3
5
4
2
SAFETY INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain
that wall mounts are properly installed and secured. Make certain that the equipment is installed securely
and cannot fall down.
7. During installation, observe the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make
certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment
- in this case, observe the special instructions noted below. Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled
with liquids, such as vases or drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Open the device for changing the battery, do not modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to
tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage
and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or
if it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is
a powered device). This equipment may only be repaired by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
22. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do
not switch it on immediately. Moisture and condensation could damage the equipment. Do not switch on
the equipment until it has reached room temperature.
23. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at
the mains outlet and/or power adapter and the equipment connector.
24. When connecting the equipment, make certain that the power cord or power adapter is always freely
accessible. Always disconnect the equipment from the power supply if the equipment is not in use or if
you want to clean the equipment. Always unplug the power cord and power adapter from the power outlet
at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter with
wet hands.
25. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter
from the power outlet.
26. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or
before extended periods of disuse.
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
There are no user serviceable parts inside. Have repairs carried out only by qualified service personnel.
CAUTION – HIGH VOLUME LEVELS WITH AUDIO PRODUCTS!
This equipment is intended for professional use. Therefore, commercial use of this equipment is subject to the
respectively applicable national accident prevention rules and regulations. As a manufacturer, Adam Hall is
obligated to notify you formally about the existence of potential health risks. Hearing damage due to high volume
and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL)
that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason,
avoid prolonged exposure to volumes in excess of 90 dB.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/
downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Ans-
pach / Email [email protected] / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
PANEL DESCRIPTION
1
SPEED CONTROL
Adjusts the speed of the volume modulation. Turning this control clockwise continuously reduces the rise
and fall times increasing the tremolo effect tempo.
2
INTENSITY CONTROL
Adjusts the depth of the modulation. Turning this control clockwise increases the tremolo effect from a soft
flutter to a deep pulse with pronounced dips and peaks. With the control fully counterclockwise there is no
modulation of the signal.
3
SHAPE CONTROL
Adjusts the modulation waveform from sine wave with a smooth rise and fall fully counterclockwise to
square wave for a stuttering helicopter chop fully clockwise.
4
ON/OFF SWITCH
Activates the effect or switches the pedal to bypass mode.
5
LED STATUS INDICATOR
Lights when the effect is switched on. This LED also doubles as battery level indicator when the pedal is
battery powered. When the LED goes dim or no longer lights while the effect is activated the battery is
drained and needs replacing.
6
INPUT
Use a quality instrument or patch cable with 1/4” plugs to connect your guitar or the output of another
effects pedal to this jack.
7
9V DC INPUT
For mains operation, connect an optional 9 Volt DC power adapter to this barrel style jack. Please refer to
“POWER REQUIREMENTS” for details..
8
OUTPUT
Use a quality instrument or patch cable with 1/4” plugs to connect this jack to the input of your amplifier or that of
another effects pedal.
POWER REQUIREMENTS
Battery: Standard 9V battery
Power supply:
-9 V DC (regulated) 50 mA minimum
-5.5 x 2.1 mm barrel style connector center negative
ATTENTION: Please use a DC power supply or battery only! Failure to
do so may demage the unit and void the warranty.
SPECIFICATIONS
PEPTREM – Pocket TREMOLO
Tremolo Effect for guitar - Manual
© Palmer Musical Instruments, Adam Hall GmbH, D-61267 Neu-Anspach, Daimlerstr. 9, Germany TEL: ++49 (0)6081 94190
FAX: ++49 (0)6081 43280 WEB: www.adamhall.com, www.palmer-germany.com EMAIL: [email protected]
Model name:
PEPTREM
Product type:
effects
Type:
guitar effect pedals
Inputs:
1
Input connectors:
6.3 mm Jack
Input impedance:
1 M Ohm(s)
Outputs:
1
Output connectors:
6.3 mm Jack
Output impedance:
100 k Ohm(s)
Residual noise:
-85 dB
Controls:
Speed, Intensity, Shape
Display:
on/off
Operating voltage:
9 V DC power supply, 9 V block
Power consumption:
20 m A
Cabinet material:
sheet steel
Cabinet / Housing surface:
powder coated
Width:
60 mm
Depth:
100 mm
Height:
55 mm
Weight:
0.3 kg
